Marine Exterior Oil Wood Finish - 1 Gallon
PENOFIN's Marine Oil Finish seals and protects the mill bright beauty of natural wood, giving it that hand-rubbed look mariners prefer. Multiple coats may be wet-sanded to build a lustrous self-filling, hand-rubbed finish, or simply apply product and remove excess with a nap-free cloth for a flat matte finish. Due to its unique penetrating abilities, any area that is scratched or stained may be repaired using the wetsanding method.
Penofin's Marine Oil is nonyellowing, nondarkening and fast drying. No more sanding, scraping or stripping. Eliminates the cause of cracking and peeling, allowing product to penetrate deeply with Brazilian Rosewood Oil to enhance and protect your valuable wood. Penofin Marine Oil is easy to touch up. Just wipe on, allow it to penetrate the pores of the wood to feed and protect from the sun's harmful rays, then use a cloth to remove excess. Enhances natural wood like no varnish can. Don't let the varnish cycle trap you into spending sailing time scraping off layers of finish. Feed your wood... use Penofin Marine Oil Finish with Brazilian Rosewood Oil for the wood on fiberglass as well as wooden boats. Protects and enhances docks too.
Caution & Warnings
Combustible - keep this product away from heat, open flame, and sparks Beware of spontaneous combustion. Make certain all rags or other materials used with Penofin are soaked in water, stored in an air-tight container, or otherwise disposed of safely
Not available for sale in California SCAQMD Jurisdiction, LA-Eastern, LA-Western, Orange, Riverside, and San Bernardino Counties.
- 99% ultraviolet protection
- Protects and beautifies like no varnish can
- Highest-quality mildew protection
- For use on boats, cabins, cockpits, decks, railings, and docks
- Safe and easy to use
- Available in a natural tone
- Not available for sale in California SCAQMD Jurisdiction, LA-Eastern, LA-Western, Orange, Riverside, and San Bernardino Counties.
|Manufacturer Part Number||F3EMAGA|
|Sub Brand||Marine Oil|
|Coverage - Square Feet||250-300 per gallon on Smooth Surfaced New Wood; 150-200 per gallon on Rough Surfaced Old Wood|
|Made in the USA||Yes|
|Ships to HI/AK||No|