Architectural Grade Hardwood - Transparent Matte Finish - 1 Gallon
Expected to Ship 3/10/2020
Penofin Architectural Grade Transparent Hardwood Coating delivers the highest level of quality, protection and beauty. Designed to provide a protective yet breathable water and UV resistant barrier that enhances and preserves the rich exotic look of hardwoods. Utilizing an innovative blend of deep penetrating modified natural oils, cutting-edge waterborne alkyd-urethane hybrid resin technology combined with polymerized silicone for superior surface and internal water repellency. This advanced combination of technologies allows for natural oils and resins to penetrate deep into the fibers of the wood without blocking the pores, allowing for maximum internal and external water repellency while maintaining breathability. Supreme level UV resistance through the use of a multi-phase UV protection package composed of high grade trans-oxide pigments, Nano-technology UV blockers and UV photo-light stabilizers. This durable yet flexible alkyd-urethane hybrid system delivers 2-year protection on decks and 4-year protection on fences and siding.
Caution & Warnings
Combustible - keep this product away from heat, open flame, and sparks Beware of spontaneous combustion. Make certain all rags or other materials used with Penofin are soaked in water, stored in an air-tight container, or otherwise disposed of safely
- Transparent Matte Finish
- Durable yet flexible alkyd-urethane hybrid technology
- Deep penetrating modified natural oils combined with advanced waterborne delivery system for maximum penetration and natural beauty
- Water repellent yet breathable formulation
- Platinum level UV resistance Easy to maintain: Does not flake, peel or chip over time.
- Easy reapplication: No need to sand or chemically strip before re-coating.
- Low VOC (<100 g/L)
- **This product is temperature sensitive and must be shipped above 32 degrees. Store in an area protected from freezing**
|Sub Brand||Architectural Grade|
|Application||Two Thin Coats are Required|
|Clean Up||Clean up with soap and water. Keep container closed when not in use. Do not transfer contents to other containers for storage or disposal. Dry empty containers may be recycled in a can recycling program. Local disposal requirements vary.|
|Compatible Materials||Pro-Tech Cleaner and Pro-Tech Brightener|
|Coverage - Square Feet||Two Thin Coats are Required: 1st coat- 300-400 sq. ft. per gal. 2nd coat- 400-600 sq. ft. per gal.|
|Made in the USA||Yes|
|V.O.C||Less than 100g/L|
|Warranty||4-years on vertical surfaces; 2-years on horizontal surfaces when applied according to instructions|
|Ships to HI/AK||No|