Expected to Ship 6/15/2019
At OZCO not only do we create products to enhance the beauty of a project, we design innovative solutions to challenging problems. If you already have a privacy fence, and would like it to be a little taller, the Oz-Post Extender is the answer. Up until now you would have had to take extra time to dig up and replace the existing post or attach a cheap, unprofessional looking extension sleeve requiring exposed fasteners. Not the case with the Oz-Post Extender. The Oz-Post Extender will allow you to add up to 3 additional feet maintaining full strength and integrity, or it can be cut to a shorter length. It fits a 2-3/8 in. round post and works with all standard thickness tubes and can be installed in a couple minutes. First make sure your post is cut square, then carefully line up the expanding assembly and insert it into the post. As you tighten the nut with your 3/4 in. wrench, it will expand and create a tight fit. Do not over tighten. Once it is installed simply twist the extender on the exposed bolt until it is snug. Now you can easily slide on your WAP-OZ fence brackets and you're ready to go.
- Fits 2-3/8 in. poles in any standard tube thickness
- Extends poles up to 3 ft.
- Package contains 1 each: sleeve and post extender middle, pipe extension assembly, 1/2 in. x 13 in. x 8 in. carriage bolt, 1/2 in. x 13 in. hex nut, upper assembly, and lower assembly
- Hot dipped galvanized
- Limited lifetime warranty
- Suitable for use with ACQ approved lumber
|Manufacturer||OZCO Building Products|
|Manufacturer Part Number||20550|
|Brand||OZCO Building Products|
|Sub Brand||OWT Ornamental Wood Products|
|Old Product Code||PST EXT|
|Package Includes||(1) Post Extender|
|Recommended Use||Post Extender|
|Ships to HI/AK||No|