Cortex for Azek Trim - 750 Linear Feet

by FastenMaster
from $289.97
from $289.97
Always Ships Free
from $289.97

Please select options before adding to cart

In Stock

Usually Ships Same/Next Business Day


Cortex Concealed Fastening System for Azek Trim is a fast and easy way to conceal fasteners and screw heads when installing PVC trim Boards. Cortex is easy-to-use and includes everything needed, including screws, plugs and setting tools. FastenMaster recommends installing with an 18 volt cordless impact drill. The Cortex for Trim Fastening System is designed for use with PVC Trim with actual thickness of 5/8" to 5/4".

How many fasteners are needed? Horizontal trim boards less than 12" wide, use two Cortex fasteners at every framing member - rafter tail or wall stud. The screws should be 16" OC or closer. Vertical trim boards (i.e., next to a door or a window), use two Cortex fasteners every 16" OC or closer. If a trim board is 12" or wider, use three screws. Each trim board must be fastened within two inches of the end of each board. Note: Predrilling is not required throughout the majority of the project. Predrilling is required when fastening within 1/2" of the end of a board and at mitered joints. Use a 3/16" drill bit for predrilled pilot holes.


  • Compatible with AZEK Trim
  • Box of 1125 includes screws, plugs and setting tool
  • Plugs are made from manufacturer OEM trim boards, ensuring plugs match the trim
  • Trim fasteners conceal the heads of the fasteners when installing trim boards
  • TORX(R) ttap(R) Drive System
  • Traditional plugs are smooth; Frontier plugs are wood grain


Sub BrandCortex
Compatible MaterialsAzek Trim Board
Coverage - Linear Feet750
Head TypeTORX ttap Drive System
Included AccessoriesIncludes (1125) Screws, (1200) Plugs, and (3) Setting Tools
Number of Plugs1200
Number of Screws1125
Package Quantity1125
Recommended Spacing16" OC or Closer
Screw Head StyleTORX ttap Drive System
Ships to HI/AKNo