DuPont Adhesive/Primer is a high performance adhesive/primer designed to help create a high strength bond between self-adhered flashing products and wall surfaces where either adhesion can be difficult or for use in cold temperature applications.
Strengthening adhesive bonds for butyl backed construction materials such as self-adhered 100% butyl backed DuPont Flashing Systems products, specifically when applied to building substrates such gypsum, CMU, concrete, metal, glass and plastics where adhesion can be an issue.
- 13.5 oz adhesive primer
- Water and heat resistant
- Cold weather application down to 0°F
- Easy to use, no-mess spray nozzle
- Dries clear and will not yellow with age
- Can apply multiple coats
- Does not bubble
|Manufacturer Part Number||1968528|
|Clean Up||After use, invert spray can and spray for approximately 2 seconds (or until spray is free of adhesive) to clear valve and spray tip. Clean spray tip with Turpentine or mineral spirits. Note: when using solvents for cleanup, use proper precautionary measur|
|Installation Temperature||0 degrees F: sprayable up to 30 minutes 10 degrees F: sprayable up to 60 minutes 15 degrees F: sprayable up to 2 hours 25 degrees F: sprayable up to 2 hours 32 degrees F and above: sprayable 24 hours+|
|Storage||For maximum performance and shelf life, the spray adhesive can should be stored between 56Â°F (13Â°C) and 95Â°F (35Â°C) and away from direct sunlight. Do not store at temperatures above 120 degrees F (50 degrees C).|
|Ships to HI/AK||No|