DekPro Prestige Aluminum Rail Kit with Square Balusters - 42" - Stair

DekPro Prestige Stair Aluminum Rail Kits - Rackable to 40º include all components and hardware required to install a complete 6 foot or 8 foot stair railing section between two posts. Stair Prestige Rail Kits feature top and bottom lineals (pre-slotted to accept balusters), 3/4" square balusters, brackets and mounting hardware. To install, simply cut upper and lower rails to length, then position balusters in place. 36” balusters used for a 42” rail height. A 42” rail height is created with a 3-1/8" sweep below the bottom rail. The rail to post attachment brackets add a total of 1/2” to overall railing length. Slots in the top and bottom rails allow the balusters to swivel to any angle up to 40 degrees.

Prestige Aluminum Rail Kits can be cut down to any length needed. If you would like to cut a railing into two pieces and use both sides, rail bracket cut kits are available. The rail bracket cut kits include 2 top and 2 bottom rail brackets so both sides can be attached to posts.

DekPro Prestige Railing is made of durable, powder-coated aluminum that is virtually maintenance free and includes a Lifetime Warranty. It has t has a stylish, modern top rail design that will compliment any home or building. Available in four popular colors: Absolute Black, Cocoa Bronze, Dream White, and Maple Cream.

Stair Kit Includes: (1) 1-3/4" x 2-1/4” Architectural Top Rail pre-slotted to accept balusters, (1) 1-1/4” x 1-1/4” Bottom Rail pre-slotted to accept balusters, Square 3/4" Balusters: (15) per 6’ kit and (21) per 8’ kit, (2) Top Rail Brackets - Stair, (2) Bottom Rail Brackets - Stair, (1) Rail Support - Surface Mount and T30 Torx Self-drilling Screws.