DekPro InvisiCable Cable Railing for Wood or Metal Posts - Outside to Outside Mount

Shop the DekPro Store
Quick ID: Q36399
from $45.97
DekPro InvisiCable
from $45.97

Select an option for stock status and time to ship


  • For wood or metal posts
  • Easy to install with specific pre-cut lengths that can be trimmed to a finished dimension in the field
  • Made from corrosion resistant, high-strength type 316 stainless steel
  • Pull-lock system makes installation fast and easy
  • Cable assemblies have a 2-7/8" long threaded stud which installs on the backside of one end post
  • Fittings at both ends completely concealed in post which protects the fitting and provides a cleaner appearance
  • Can be drilled level into wood or metal, even on stairs or radius. No angle drilling or beveled washer needed on end posts
  • Tensioning nut is made from brass which prevents thread lock
  • Suitable for indoor or outdoor enjoyment
  • Includes stainless steel cap for non-tensioning end. (End cap for tensioning end sold separately.)


InvisiCable Cable Railing for Wood or Metal Posts - Outside to Outside Mount allows for virtually unobstructed views with low maintenance for indoor or outdoor use. The InvisiCable is an easy to install, pre-cut cable system that can be trimmed to a finished dimension in the field. A 2.5" threaded stud is pre-attached to one end of the 1/8" stainless steel cable. The end of the threaded stud is broached for a hex wrench used to hold in place while tensioning with a brass hex nut. The other end attaches to a Pull-Lock system after pulling through the posts. No field swaging needed. The sleek and attractive design comes with a strand of cable with threaded stud, Pull-Lock fitting, washers, nut and two stainless steel caps to give the rail a complete, finished look. The fittings are concealed in the post creating a clean, almost invisible infill. One of the most economical cable rail systems on the market.

Item Contents

End Caps
1/8" Diameter Type 1x19 Stainless Steel Cable
Brass Nylock Hex Nut
Pre-attached 2.75" Threaded Stud
Pull-Lock Lag


ApplicationFor Wood or Metal
Can Be Cut to LengthYes
Compatible Tools5/32 Drill Bit if 1/8" Cable, 7/32 if 3/16" Cable, 9/32 Drill Bit for Threaded Stud Intallation, 29/64 Drill Bit for Pull-Lock INstallation, 1/8 Hex Wrench for Holding the Stud, 7/16 Wrench for Tightening Jam Nuts, Cable Cutting Tool, If Using Post Protector Tubes, 1/4 Drill Bit
Kit Includes(1) 1/8" Diameter Type 1x19 Stainless Steel Cable with (1) Pre-attached 2.75" Threaded Stud, (1) Pull-Lock Lag, Washers, Brass Nylock Hex Nut, and (2) End Caps
Material316 Grade Stainless Steel
Package Quantity1
TypeCable Rail
Warranty10-year Limited

Weights and Dimensions

Diameter (Inches).125

Reviews & Q&A

Want to learn more? Read product reviews and questions and answers about this product from other customer just like yourself. Have a question? Just click the 'Ask a Question' button and let us know. We'll review your question and post the answer here.