|
Series
|
TC-2
|
|
Package Quantity
|
90
|
|
Appearance
|
Semi gloss black finish, rectangular body with circle top V shaped hole in center. Two sets of large opposing prongs on top, one set of small prongs extending from bottom of body.
|
|
Dimensions
|
.663” h x 1.67” w x 1.25” d
|
|
Material
|
.060 304-2B annealed stainless steel (Non-magnetic) ; Yield strength 45.5 kpsi ; Tensile strength 101.7 kpsi
|
|
Finish
|
Black oxide with sealer topcoat
|
|
Workability
|
All work can be done quickly from above using basic tools (hammer, screw gun, sledge hammer…)
|
|
Recommended Screw Used
|
Quality stainless steel #8 x 2" square drive bugle head decking screw. Screws and square drive bit included in every box and bucket.
|
|
Coverage
|
A fastener is needed at every intersection of a joist and decking board. When using 5.5” decking with 16” on center joists: Square footage x 1.75 = # Fasteners
|
|
Gapping
|
Boards should be installed tight together and allowed to “shrink gap” over time.
|
|
Expansion & Contraction
|
Fasteners are designed to allow wood decking to expand and contract naturally by sliding on the fastener prongs and still maintain hold down strength. From the original point of installation TC-2S can handle up the ¼ inch of contraction.
|
|
Coverage - (Sq. Ft.)
|
90 count bag covers 50 sq. ft. at 16" OC, 35 sq. ft. at 12" OC, 70 sq. ft. at 24" OC
|
|
Manufacturer SKU
|
F-4387-2SRB
|
Like Us on Facebook
Follow Us on Twitter
Our Product Blog
Donate to diaperLove